Brother HL-7050 Series User Manual Download Page 106

Page: 106 / 253

CONTROL PANEL 3 - 22

HL7050_US_UG_FM5.5

Control Panel LCD menu

There are eight menus. For more information about the selections
available in each menu, please see the pages listed below.

■

INFORMATION
For more information, see page 3-23.

■

PAPER
For more information, see page 3-24.

■

QUALITY
For more information, see page 3-24.

■

SETUP
For more information, see page 3-25.

■

PRINT MENU
For more information, see page 3-27.

■

NETWORK
For more information, see page 3-31.

■

INTERFACE
For more information, see page 3-32.

■

RESET MENU
For more information, see page 3-33.

The control panel LCD names for the paper trays are as
follows.

Paper tray

TRAY 1

Multi-purpose tray

MP TRAY

Optional lower tray

TRAY 2, TRAY 3,
TRAY 4

Optional Duplex unit for Duplex
printing

Optional Mailbox unit

Summary of Contents for HL-7050 Series






























































































































































































































































Search results

Summary of Contents for HL-7050 Series

Reviews:

Brands by name

Popular brands

Brother HL-7050 Series, User Manual

Search results

Summary of Contents for HL-7050 Series

Reviews:

Brands by name

Popular brands