manualshive.com logo in svg

Brother HL-7050 Series, User Manual

Share
Download
Brother HL-7050 Series User Manual Download Page 60

ABOUT THIS PRINTER 1 - 41

HL7050_US_UG_FM5.5

Manual feed

If you put paper in the multi-purpose tray when the setting MANUAL 
FEED = ON has been set in PAPER menu using the control panel 
Menu buttons, the printer will only load paper from the multi-purpose 
tray.

When you feed paper manually, please remember the 
following:  

■

If your application software allows you to select manual 
feed in the Print menu, you can select it through the 
software. Since the software or command setting overrides 
the control panel button setting, you do not need to set the 
MANUAL FEED mode and the paper size in the PAPER 
menu.

■

If you use pre-printed paper in the multi-purpose tray, you 
should put the top edge of the paper inside first with the 
pre-printed side face up.  

Summary of Contents for HL-7050 Series






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands