manualshive.com logo in svg

Brother HL-7050 Series, User Manual

Share
Download
Brother HL-7050 Series User Manual Download Page 48

ABOUT THIS PRINTER 1 - 29

HL7050_US_UG_FM5.5

1

Open the multi-purpose tray and lower it gently.

Figure 1-19

■

Before you print envelopes, you must 'fan' the stack to 
avoid paper jams and misfeeds. 

Figure 1-18

■

Do not load different types of paper at the same time in the 
paper tray because it may cause paper jams or misfeeds.

■

Do not print envelopes using duplex printing.

■

For proper printing, you must choose the same paper size 
from your software application as the paper in the tray.

■

If your application software does not allow you to select the 
paper size in its Print menu, you can use the control panel 
Menu buttons to go to the PAPER menu to change the 
paper size. For more information, see Chapter 3.

Summary of Contents for HL-7050 Series






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands