manualshive.com logo in svg

Brother HL-7050 Series, User Manual

Share
Download
Brother HL-7050 Series User Manual Download Page 198

TROUBLESHOOTING 6 - 30

HL7050_US_UG_FM5.5

BR-Script 3

Problem

Recommendation

The printer cannot print. If IGNORE DATA appears on the LCD, please do the 

following:
1. Reset the printer. [Press - twice, then press Set twice 

and finally press Go.]

2. Turn off ERROR PRINT in BR-SCRIPT3 mode. 

[Press + five times, then press Set and then -, now 
press Set twice, select ERROR PRINT = OFF and 
press Set and finally press Go.]

3. If the printer prints out the error message page which 

says "ERROR NAME; limitcheck", add more 
memory. See Installing extra DIMM memory in 
Chapter 4.

The print speed slows 
down.

Add optional memory. See Installing extra DIMM 
memory in Chapter 4.

The printer cannot print 
EPS data.

You need the following settings to print EPS data:
1. In the Printer folder, select the printer you use.
2. Press the Advanced button on the PostScript tab.
3. Select 'Tagged binary communication protocol' in 

data format.

If you do not follow the instructions for using the printer, you 
may be responsible for all repairs.

Summary of Contents for HL-7050 Series






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands