manualshive.com logo in svg

Brother HL-7050 Series, User Manual

Share
Download
Brother HL-7050 Series User Manual Download Page 127

3 - 43 CONTROL PANEL

HL7050_US_UG_FM5.5

Buzz indications

The control panel has a buzzer. The buzzer will sound when one of 
the control panel buttons is pressed, or the status of the printer 
changes. See the table for a description of the buzzer meaings.

You can change the settings of the buzzer by using the buttons on 
the control panel. 
To chagne the setting of the buzzer, press the + (plus) button until 
SETUP is displayed, then press the Set button. Press the + (plus) 
button until ERROR BUZZER, PANEL BUZZER or BUZZER 
VOLUME is displayed and press Set. 
See SETUP in this chapter for a description of the buzzer settings.

Buzz 
indications

Conditions

A short buzz

■

When you enter any information using the button.

Two short 
buzzes

■

When you come back to the top menu option after 
you move forward or backward through the 
menus.

■

When you move to another menu level.

Five short 
buzzes

■

When an error occur.

A long buzz

■

When you set any optional menu setting.

Two long 
buzzes

■

When the printer becomes online.

■

When the printer becomes READY status after a 
warming up condition.

A short and a 
long buzz

■

When you enter wrong information.

Summary of Contents for HL-7050 Series






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands