manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 92

CHAPTER 4  DISASSEMBLY AND RE-ASSEMBLY

4-28

  3.14

Engine PCB ASSY / High-Voltage Power Supply PCB ASSY

(1) Remove 

the 

M4x12

 Taptite screw to remove the insulation sheet.

(2)  Remove the three 

M4x12

 Taptite screws securing the engine PCB and the high-voltage

power supply PCB.

(3)  Lift the engine PCB and high-voltage power supply PCB together and disconnect the

connector which connects two PCBs together to remove the high-voltage power supply
PCB ASSY.

(4)  If necessary, remove the T/R electrode helical spring from the T/R plate.

Fig. 4-50

!

CAUTION:

Be sure not to lose the T/R electrode helical spring after removing it.

NOTE:

When re-assembling the T/R electrode helical spring onto the plate, press the spring onto the
plate firmly with a flat bladed screwdriver and ensure that it is retained securely.

Screw, bind M4x12

Screw, bind M4x12

Engine PCB ASSY

High-voltage power
supply PCB ASSY

T/R electrode

helical spring

T/R plate

Insulation sheet

Screw, bind M4x12

Step (4)

Step (3)

PR99153

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands