manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 20

CHAPTER 1  GENERAL

1-8

  3.4.3

Print delivery

(1)  Output tray stacking

 

capacity:

Maximum 150 sheets (80 g/m

2

)

 face-down 

only

(2)  Straight paper path output at the rear of the printer

 

capacity:

1 sheet

**Thicker paper printing is recommended.

 face-up 

only

NOTE:

When using the straight paper path feed and the rear output method for thicker paper
printing, lift up the rear cover at the rear of the printer.

Face-down:

Delivery with the printed face of the paper downwards.

Face-up:

Delivery with the printed face of the paper upwards.

  3.5

Printing Area

  3.5.1

Effective printing area

The effective printing area means the area within which the printing of all the data received
without any omissions can be guaranteed.

4.23mm

4.23mm

208mm

2,400 (80 characters)

25

25

NOTE:

The units in the above figure are dot size
based on 300 dpi resolution.

25 dots at both sides is for italic characters.

(1) Supported by the engine

(2) Supported by the emulation

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands