manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 25

CHAPTER 2  INSTALLATION AND BASIC OPERATION

2-3

3.  INSTALL THE PRINTER

You need to implement hardware setup and driver installation to use the printer.

Firstly, identify the Operating System on your computer.  Then, purchase the appropriate
interface cable (parallel or USB) for your computer.

The installation programs for the hardware setup and driver installation are contained on the
supplied CD-ROM.

If you do not have a CD-ROM drive, you can install the printer driver from the supplied floppy
disk.  (See 

Subsection 3.2 ‘For Windows

®

 Users with No CD-ROM Drive’

.)

3.1

For Windows

®

 Users

(1)  Turn on your PC power.  Close all the applications running on your PC.

(2)  Insert the supplied CD-ROM into the CD-ROM drive.

(3)  The opening screen will appear automatically in Windows

 95/98/NT4.0.

NOTE:

If the opening screen does not appear;

Click Start and select Run.  Then, type 

D:\START

 in the command line box and click OK.  (If

your CD-ROM drive is not D, type the correct drive letter instead of “

D

”.)

In Windows

 3.1;

Click the File menu in the Program Manager screen and select Run.  Then, type 

D:\START

 in

the command line box and click OK.  (If your CD-ROM drive is not D, type the correct drive
letter instead of “

D

”.)

(4)  Select the model of your printer.

Fig. 2-2

(5)  Select the language you want, then follow

the instructions on the screen.

Fig. 2-3

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands