manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 108

CHAPTER 5  PERIODIC MAINTENANCE

5-6

  3.3

Cleaning the Scanner Window

When replacing the drum unit or toner cartridge with a new one, be sure to clean the scanner
window.

1)  Turn off the power switch and unplug the power cord.

2)  Remove the drum unit from the printer.

3)  Gently wipe the scanner window (colored magenta in the figures below) with a soft dry

cloth.

Fig. 5-8

!

CAUTION:

Do not touch the scanner window with your fingers.

Do not wipe the scanner window with cleaning alcohol (isopropyl).

  3.4

Clean the Electrical Terminals

When replacing the drum unit or toner cartridge with a new one, be sure to clean the electrical
terminals inside the printer body.

1)  Turn off the power switch and unplug the power cord.

2)  Remove the drum unit from the printer.

3)  Wipe the electrical terminals as shown in the figure below with a soft dry cloth.

Fig. 5-9

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands