manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 243

CHAPTER 1 ABOUT THIS PRINTER

1-25

To print on both sides of the paper from the paper cassette

 1.

Select the required manual duplex printing mode from the driver.

 2.

The printer will automatically print all the even numbered pages on one side of the
paper first.

 3.

Remove the printed even numbered pages from the output tray and re-insert them
into the paper cassette, loading the paper with the side to be printed (blank side) face
down, and the top edge toward you.  Follow the instructions on the computer screen.

Fig. 1-21  Paper orientation for the paper cassette

 4.

The printer will now automatically print all the odd pages on the reverse side of the
paper.

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands