manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 317

A-8

Resident Font

The following bitmapped fonts are resident in this printer.

HL-1240:
Bitmapped Fonts

• 

Brougham 10 (12 point) Normal, Italic, Bold, BoldItalic (Portrait & Landscape)

• 

Brougham 12 (10 point) Normal, Italic, Bold, BoldItalic (Portrait & Landscape)

• 

Letter Gothic 16.66 (8.5 point) Normal, Italic, Bold, BoldItalic (Portrait &
Landscape)

HL-1250 :
Bitmapped Fonts

This printer has the following bitmapped fonts. They can be used in the
HP LaserJet 6P, EPSON FX-850, and IBM Proprinter XL modes. They have the
following characteristics.

• 

Letter Gothic 16.66 Normal, Italic, Bold, BoldItalic (Portrait & Landscape)

• 

OCR-A(Portrait & Landscape)

• 

OCR-B(Portrait & Landscape)

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands