manualshive.com logo in svg

Brother HL-1240, Service Manual

Share
Download
Brother HL-1240 Service Manual Download Page 34

CHAPTER 2  INSTALLATION AND BASIC OPERATION

2-12

  4.3.2

To print on both sides of the paper from the manual feed slot

!

CAUTION:

Before re-inserting the sheets, straighten them, or paper feed errors will occur.

The use of very thin or very thick paper is not recommended.

When the manual duplex function is used, it is possible that paper jams may occur or print
quality may not be satisfactory.

(1)  Select the required manual duplex printing mode and manual feed mode from the driver.

(2)  Using both hands, insert the paper into the manual feed slot with the side to be printed

first facing upwards.  Follow the instructions on the computer screen.

(3)  Repeat action (2) until you have printed all the even numbered pages.

(4)  Remove the printed even numbered pages from the output tray

(5)  Re-insert them in order into the manual feed slot,

loading the paper with the side to be printed
(blank side) face up, and the top edge towards
the printer.  Follow the instructions on the
computer screen.  (Fig. 2-27)

(6)  Repeat action (5) until you have printed all the

odd numbered pages on the reverse side of the
paper.

Fig. 2-27

Summary of Contents for HL-1240














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands