Brother GT-341 Instruction Manual Download Page 28

Page: 28 / 178

3. Getting Started

GT-3 Series

3-1. Placing Your Printer

Uncrate and Setting the printer by following the steps in Uncrate Manual, which is packed with the printer. Locate

your printer taking the following into account.



Environmental conditions are suitable.



Avoid direct sunlight, dust and extremes of humidity.



Never use an extension cable.



A working space must be left around the printer.

Minimum space of 100 cm (39.4 inch) on the front and the right. Keep away from the right side of the

Exhaust Fan at least by 20 cm (7.9 inch).



Body size is app. 137 cm (53.9 inch) x 104.5 cm (41.1 inch) x 66 cm (26.0 inch) and weighs app. 111 kg

(245 lb).



The table that supports the printer should be at least 137 cm (53.9 inch) in width and 104.5 cm (41.1

inch) in depth, and should be able to bear a weight of 150 kg (330 lb) or more. Its tabletop must be level.

Unit:cm

0051Y

Summary of Contents for GT-341



















































































































































































Search results

Summary of Contents for GT-341

Reviews:

Related manuals for GT-341

Brands by name

Popular brands

Brother GT-341, Instruction Manual

Search results

Summary of Contents for GT-341

Reviews:

Related manuals for GT-341

Brands by name

Popular brands