Brother FAX 560, Service Manual

Page: 139 / 194

VI - 6
Error Code
(Hex.)
Error factor
( 8101 The cam sensor sticks to OFF. ) *
( 8102 The cam sensor sticks to ON. ) *
( 8103 At the unexpected timing, the cam sensor detects the switching cam being in the
home position. ) *
( 8104 The cam sensor cannot detect the home position of the switching cam even after
one full turn of the cam. ) *
( 8105 After coming ON, the cam sensor cannot go OFF even if the switching cam turns in
the reverse direction. ) *
( 82xx Although recording paper has been fed by 150 mm after the start of recording, the
registration sensor is still OFF. )
( 8303 Although recording paper has been fed by 360 mm after the start of recording, the
registration sensor is still ON. )
( 8809 Before the start of paper feeding, the registration sensor is already ON. )
( 880B The registration sensor is ON when you turn the power on or after you open and close
the control panel ASSY.
( A301 In document scanning, the document front sensor goes OFF although the document
rear sensor is still OFF. )
( A302 In document scanning, the document rear sensor is still OFF although a document
has passed through the document front sensor. )
( A303
In document ejecting caused by any of the following, the document front sensor goes
OFF but the document rear sensor remains OFF:
- Depression of the
STOP key in midway of scanning.
- Illegal copying (Copying a document longer than the recording paper or making an
enlargement copy larger than the recording paper).
- Recovery operation from the error state (e.g., "DOCUMENT JAM" and "CHECK
PAPER" error.)
( A304
In document ejecting caused by any of the following, the document rear sensor sticks
to OFF:
- Depression of the
STOP key in midway of scanning.
- Illegal copying (Copying a document longer than the recording paper or making an
enlargement copy larger than the recording paper).
- Recovery operation from the error state (e.g., "DOCUMENT JAM" and "CHECK
PAPER" error.)
( A307 In document scanning, the document rear sensor remains ON although the document
has been fed by the specified amount after the document front sensor went OFF. )
( A308 In document ejecting caused by any of the following, the document rear sensor
remains ON although the document has been fed by the specified amount after the
document front sensor went OFF:
- Depression of the
STOP key in midway of scanning.
- Illegal copying (Copying a document longer than the recording paper or making an
enlargement copy larger than the recording paper).
- Recovery operation from the error state (e.g., "DOCUMENT JAM" and "CHECK
PAPER" error.)
*
These errors could occur only in machines equipped with improved drive units.