Brother E-100M Page 54 Operation Manual Download

Page: 54 / 66

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

CHANGING THE CONTRAST OF THE LCD DISPLAY

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

CHANGING THE CONTRAST OF THE LCD DISPLAY

If the LCD display is hard to read, it can be made either lighter or darker.

Turn off the machine.

Hold down the

key, and press the

key to turn the machine on again.

The screen shown at the right appears.

Press the

key to change the

contrast.

To make the LCD display lighter, press the

key.

To make the LCD display darker, press the

key.

Press the

key.

The LCD display becomes darker, and then the
machine goes off automatically.

Key information

•

If you do not want to change the LCD display contrast, press the

key.

Summary of Contents for E-100M



































































Search results

Summary of Contents for E-100M

Reviews:

Related manuals for E-100M

Brands by name

Popular brands

Brother E-100M, Operation Manual

Search results

Summary of Contents for E-100M

Reviews:

Related manuals for E-100M

Brands by name

Popular brands