17
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
MAKING AN EMBROIDERED APPLIQUÉ FROM A ONE-POINT PATTERN
CONTENTS
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
INDEX
Chapter 6
●
●
5.
Embroidering the appliqué
Before embroidering, check that the thread cartridge and design frame are correctly inserted.
1
Press the
key.
The part of the pattern shown on the LCD display
is embroidered.
Removing the design frame
1
1
1
1
Pull the design frame straight out.
CAUTION
•
Before pulling out the design frame, remove the thread cartridge, and make sure that the
design frame has moved to its starting point so it can be taken out.
NOTE
•
When embroidering is finished or while sewing chenille embroidery, the design frame
automatically moves so that it can be taken out after the thread cartridge is removed. (See
the section
Chenille embroidery
on page 2
5
.) If you want to stop embroidering and take
out the design frame, follow the instructions in the section
Removing the design frame
on
page 44.
Key information
•
To stop embroidering, press the
key. After sewing a few stitches, the machine will
stop.
•
To continue embroidering, press the
key.
