Brother E-100M Page 51 Operation Manual Download

Page: 51 / 66

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

REMOVING THE DESIGN FRAME

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

Press the

key.

The screen displayed at the right appears again.

Insert the thread cartridge, and then press the

key to continue sewing.

REMOVING THE DESIGN FRAME

If you want to stop embroidering and take out the design frame, follow the steps below.

Press the

key to stop embroidering.

After sewing a few stitches, the machine stops.

Press the thread cartridge release button

(

), and then remove the thread

cartridge.

Press the

key. After the design frame

moves to its starting point, pull it straight
out.

Key information

•

Pressing the

key displays the screen shown at the right.

•

To go back to step

, press the

key.

NOTE

•

If the screen shown at the right appears, the
thread cartridge was not removed. Remove
the thread cartridge.

STOPPING AND CONTINUING EMBROIDERING / REMOVING THE DESIGN FRAME

Summary of Contents for E-100M



































































Search results

Summary of Contents for E-100M

Reviews:

Related manuals for E-100M

Brands by name

Popular brands

Brother E-100M, Operation Manual

Search results

Summary of Contents for E-100M

Reviews:

Related manuals for E-100M

Brands by name

Popular brands