background image

39

●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ●  ● 

RETRIEVING A SAVED PATTERN

CONTENTS

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

INDEX

Chapter 6

Checking the text in a saved pattern

If the saved pattern is a frame or template pattern with 
text, 

 appears to show that you can check the text. (See 

the section 

Saving a pattern

 on page 34 and the section 

Retrieving a saved pattern

 on page 37.)

1

Press the 

 key. If 

 appears, press 

the 

 key to check the rest of the text.

A screen like the one shown at the right appears.

1

Number of the selected pocket

2

Selected font and text size (stitch)

3

If 

 or 

 appears, press the 

 or 

 key to display 

more characters.

4

Number of the line of text being checked

5

Shows which line of the total number of lines of text is being checked

6

Text that has been entered

2

If more than one line of text has been 
entered, press the 

 key.

A screen like the one shown at the right appears for 
the next line of text.

3

When you are finished checking the text, press the 

 key.

If you were saving a pattern, an animation like the 
one shown at the right appears. Go back to step 

5

 

on page 35.

If you were selecting a saved pattern, an animation 
appears, and then a screen like the one shown at 
the right appears. Go back to the section 

Inserting 

the thread cartridge and design frame

 on page 13 

to start embroidering.

 Key information

To go back to the screen where you can select a pocket, press the 

 key.

To go back to the previous screen, press the 

 key.

ABCDE

1

2

3

5

6

4

abcde

Summary of Contents for E-100M



































































Reviews: