Brother DCP-T520W, Online User'S Manual, Page: 473 / 496

Level 1 Level 2 Level 3 Descriptions
WLAN(Wi-Fi) MAC Address
- View the machine's MAC address.
Wi-Fi Direct Manual - Configure your Wi-Fi Direct network settings
manually.
Group Owner - Set your machine as the Group Owner.
Push Button - Configure your Wi-Fi Direct network settings
using the one-button push method.
PIN Code - Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Device
Information Device Name View your machine's device name.
SSID View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
IP Address View your machine's current IP Address.
Status
Information Status View the current Wi-Fi Direct network status.
Signal View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner,
the LCD always indicates a strong signal.
I/F Enable - Turn the Wi-Fi Direct connection on or off.
Web Connect
Settings Proxy Settings Proxy Connection Change the Web connection settings.
Address
Port
User Name
Password
Network I/F - - Select the network connection type.
Network Reset - - Restore all network settings back to the
factory settings.
Settings >
[Print Reports]
Level 1 Descriptions
XMIT Verify Print a Transmission Verification Report for your last transmission.
Address Book Print a list of names and numbers stored in the Address Book.
Fax Journal Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
User Settings Print a list of your settings.
Network Config Print a list of your Network settings.
WLAN Report Print the wireless LAN connection results.
Caller ID History
(Not available for Taiwan and
some countries)
Print a list of the available Caller ID information about the last 20 received faxes
and telephone calls.
Settings >
[Machine Info.]
Level 1 Descriptions
Serial No. Check your machine's serial number.
Firmware Version
Check your machine's firmware version.
467