Brother DCP-T520W Online User'S Manual Download Page 22

Page: 22 / 496

Home >

Introduction to Your Machine

> USB / Ethernet Port Locations on Your Brother Machine

USB / Ethernet Port Locations on Your Brother Machine

The USB and Ethernet ports are located inside the machine (Ethernet ports are available only for certain
models).

To install the driver and software necessary to use your machine, go to your model's

Downloads

page at

support.brother.com

(Windows) Or, use the Brother installation disc to set up your machine (not available in all countries).

1. Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the

open position.

2. Locate the correct port (based on the cable you are using) inside the machine as shown.

Carefully guide the cable through the cable channel and out the back of the machine.

3. Gently close the scanner cover using both hands.

Related Information

•

Introduction to Your Machine

Summary of Contents for DCP-T520W
















































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-T520W

Reviews:

Brother DCP-T520W, Online User'S Manual, Page: 22 / 496

Search results

Summary of Contents for DCP-T520W

Reviews: