Brother DCP-T520W Online User'S Manual Download Page 16

Page: 16 / 496

Power On/Off

Press

to turn the machine on.

Press and hold

to turn the machine off. The LCD displays

[Shutting Down]

and stays on for a few

seconds before turning itself off.

If you turn the machine off using

, it will still clean the print head periodically to maintain print quality. To

prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.

6. Start Buttons

Mono Start

•

Press to start making copies in monochrome.

•

Press to start scanning documents (in colour or monochrome, depending on the scan setting).

Colour Start

•

Press to start making copies in full colour.

•

Press to start scanning documents (in colour or monochrome, depending on the scan setting).

SCAN

Press to switch the machine to Scan mode.

8. WiFi

Press to configure the wireless settings while the machine is idle.

9. Copy Buttons

•

Enlarge/Reduce

Press to enlarge or reduce copies.

•

Copy Quality

Press to temporarily change the quality of your copies.

•

Copy / Scan Options

Press to access temporary settings for copying or scanning.

Related Information

•

Introduction to Your Machine

Summary of Contents for DCP-T520W
















































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-T520W

Reviews:

Brother DCP-T520W, Online User'S Manual, Page: 16 / 496

Search results

Summary of Contents for DCP-T520W

Reviews: