manualshive.com logo in svg

Brother DCP-T520W, Online User'S Manual, Page: 381 / 496

Share
Download
Brother DCP-T520W Online User'S Manual Download Page 381

Difficulties

Suggestions

to power down the machine. Using 

 allows minimal power to the machine,

resulting in periodic, but less frequent, cleaning of the print head.

Characters and lines are blurred.

Check the printing alignment.
See 

Related Information

: 

Check the Print Alignment from Your Brother Machine

.

Change the print options.
See 

Related Information

: 

Change the Print Options to Improve Your Print

Results

.

Printed text or images are
skewed.

Make sure the paper is loaded correctly in the paper tray and the paper guides
are adjusted correctly.
See 

Related Information

: 

Load Paper

.

Make sure the Jam Clear Cover is closed correctly.

There are smudges or stains at
the top centre of the printed page.

Make sure the paper is not too thick or curled.
See 

Related Information

: 

Acceptable Paper and Other Print Media

.

Printing appears dirty or ink
seems to run.

Make sure you are using the recommended types of paper. Do not handle the
paper until the ink is dry.
See 

Related Information

: 

Acceptable Paper and Other Print Media

.

Make sure the printing surface is face down in the paper tray.

Make sure you are using Brother Original ink designed for your model.

If you are using photo paper, make sure the glossy side of the photo paper is
face down in the tray and you have set the correct paper type. If you are printing
a photo from your computer, set the Media Type in the printer driver or in the
application you use to print.

Ink is smudged or wet when using
glossy photo paper.

Be sure to check the front and back of the paper. Place the glossy surface
(printing surface) face down.
See 

Related Information

: 

Change the Paper Size and Paper Type

.

If you use glossy photo paper, make sure the paper type setting is correct.

Stains appear on the reverse side
or at the bottom of the page.

Make sure the printer platen is not dirty with ink.
See 

Related Information

: 

Clean the Machine's Printer Platen

.

Make sure you are using Brother Original ink designed for your model.

Make sure you are using the paper support flap.
See 

Related Information

: 

Load Paper

.

Make sure the paper feed rollers are not dirty with ink.
See 

Related Information

: 

Clean the Paper Feed Rollers

.

The printouts are wrinkled.

(Windows)
In the printer driver, select the 

Advanced

 tab, click 

Other Print Options

, and

then click 

Advanced Colour Settings

. Clear the 

Bi-Directional Printing

 check

box.

Make sure you are using Brother Original ink designed for your model.

Smudge or stain on the reverse
side of the page when using the
automatic 2-sided printing feature.
(DCP-T720DW/DCP-T725DW/
DCP-T820DW/DCP-T825DW/
MFC-T920DW/MFC-T925DW)

(Windows)
Change the Reduce Smudge option in your printer driver properties or
preferences.
See 

Related Information

: 

Prevent Smudged Printouts and Paper Jams

(Windows)

.

375

Summary of Contents for DCP-T520W

















































































































































































































































































































































































































































































































Reviews:

No comments