Brother DCP-T520W Online User'S Manual Download Page 427

Page: 427 / 496

Refer to the sample below to check the print quality.
DCP-T520W/DCP-T525W

Patterns

Print Quality

None

A Few

About Half

Many

DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

Patterns

Print Quality

None

A Few

About Half

Many

7. Do one of the following:

•

If print head cleaning is needed, press

Colour Start

to start the cleaning procedure.

•

If print head cleaning is not needed, press

Stop/Exit

to finish the Print Quality check.

8. After the cleaning procedure is finished, press

. Then, press

Colour Start

The machine prints the Print Quality Check Sheet again. Check the quality of the four colour blocks on the
sheet again.

If you clean the print head several times and the print has not improved, try the Special cleaning method. See

Related Information

IMPORTANT

DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print
head's warranty.

When a print head nozzle is clogged, the printed sample looks like this:

After the print head nozzle is cleaned, the horizontal lines are gone:

MFC-T920DW/MFC-T925DW

1. Press

(Ink).

2. Press

to make your selections:

a. Select

[Impr. PrintQuality]

. Press

b. Select

[Impr. PrintQuality]

again. Press

421

Summary of Contents for DCP-T520W
















































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-T520W

Reviews:

Brother DCP-T520W, Online User'S Manual, Page: 427 / 496

Search results

Summary of Contents for DCP-T520W

Reviews: