Brother DCP-1000, Service Manual, Page: 133 / 222

6-6
Error Code
X X
(Hex.)
Error factor
( AE The CCD HP sensor sticks to OFF, indicating that the CCD unit has not
returned to the home position. )
( AF The CCD HP sensor sticks to ON, indicating that the CCD unit has stayed in
the home position. )
( B1 Dark level offset data error. )
( B2 Gain control data error. )
( B3 Scan area left edge detection error. )
( B4 Scan area right edge detection error. )
( B7 A/D converter reference voltage error (at High level). )
( B8 A/D converter reference voltage error (at Low level). )
( BA Magnification error for substantial white level data. )
( BB Substantial white level data error in black & white mode. )
( BC Substantial white level data error in photo mode. )
( BD Black level data error. )
( BE Detection error of black mark. )
( BF Detection error of ADF scanning position. )
( D5 The MODEM fails to complete the command transmission sequence. )
( E4 Out of recording paper. )
E6
Write error in EEPROM.
( E8
Data scanning error during transmission. )
( EA
Document removed in phase B.)
( F5
EOL not found in page memory transmission mode. )
( F6
PC interface error. )
Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are
displayed as messages described in "[ 1 ] Error messages on the LCD." In the maintenance mode
(Function code 82), those error codes may be displayed.