Brother BAS-311E, Instruction Manual

Page: 30 / 226

Programmer 29
Chapter 2 Programming with Help Function
Lines
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
1
Programming
1. Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2. Select with and press .
3. Move the work clamp with . Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select with and press .
5. Input the stitch length and press .
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6. Move the work clamp with . Press
when the needle point is at point B of the
pattern.
7. Repeat step 6 and create the program to
point E.
8. When point E is programmed, press
ESC ESC
twice.