Brother BAS-311E Instruction Manual Download Page 111

Page: 111 / 226

Programmer

110

Chapte 2 Programming with Help Function

Setting the attribute (split data)

Move to the desired needle position and press

The attribute setting screen appears.

Set the attribute.

Press

after setting.

The screen returns to the confirmation screen.

Setting the attribute (trigger data)

Move to the desired needle position and press

The attribute setting screen appears.

Set the attribute.

Press

after setting.

The screen returns to the confirmation screen.

Stoppage of the needle at the lower end

Press

to select ON/OFF.

Machine stop

Press

to select ON/OFF.

Extended option output trigger

Press

to select the number.

Summary of Contents for BAS-311E



































































































































































































































Search results

Summary of Contents for BAS-311E

Reviews:

Related manuals for BAS-311E

Brands by name

Popular brands

Brother BAS-311E, Instruction Manual

Search results

Summary of Contents for BAS-311E

Reviews:

Related manuals for BAS-311E

Brands by name

Popular brands