Brother BAS-311E Instruction Manual Download Page 109

Page: 109 / 226

Programmer

108

Chapte 2 Programming with Help Function

Checking each stitch

Press

to move forward,

to backward.

The needle steps by each stitch and the setting of the data is displayed.

Checking a series of stitches automatically

Input the stitch count to check.

Press

to move forward,

to backward.

The needle moves by the input count and the setting of the data is displayed.

Input "999" to check all stitches.

Skipping

Input the stitch count to the destination.

Press

, then press

to move forward and

to move backward.

The needle skips sewing according to the input stitch count.

Input "999" to skip sewing to the sewing end position or to a breakpoint.

Setting the attribute (stitch data)

Move to the desired needle position and press

The attribute setting screen appears.

Summary of Contents for BAS-311E



































































































































































































































Search results

Summary of Contents for BAS-311E

Reviews:

Related manuals for BAS-311E

Brands by name

Popular brands

Brother BAS-311E, Instruction Manual

Search results

Summary of Contents for BAS-311E

Reviews:

Related manuals for BAS-311E

Brands by name

Popular brands