Brother ADDENDUM 884-T07, Operation Manual

Page: 247 / 280

Maintenance 245
7
—————————————————————————————————————————————————————————————————————————————————————
Maintenance
Simple embroidery machine maintenance operations are described below. Always keep the machine clean,
otherwise malfunctions may occur.
Cleaning the LCD
If the surface of the LCD is dirty, lightly wipe it with
a soft dry cloth. Do not use organic cleansers or
detergents.
Cleaning the machine surface
If the surface of the machine is slightly dirty, wipe it
with a soft dry cloth. If the machine is heavily dirty,
lightly soak a cloth in neutral detergent, squeeze it
out firmly, and then wipe the surface of the
machine. After cleaning it once with a wet cloth,
wipe it again with a dry cloth.
CAUTION
Note
●
Do not use chemical products, such as
benzene or thinner.
Cleaning the hook
Periodically remove lint and dust for better
performance from Hook race area.
Use the included cleaning brush.
1
Turn off the embroidery machine.
CAUTION
2
Open the hook cover, and remove the
bobbin case. (Refer to page 36.)
●
Unplug the power supply cord before
cleaning the machine, otherwise
injuries or an electric shock may occur.
●
Unplug the power supply cord before
cleaning the machine, otherwise
injuries or an electric shock may occur.