Brother ADDENDUM 884-T07, Operation Manual

Page: 119 / 280

Creating an Appliqué Piece 117
—————————————————————————————————————————————————————————————————————————————————————
4
Creating an Appliqué Piece
Appliqué pieces can be created from the built-in patterns and patterns on embroidery cards. This is
convenient for fabrics that cannot be embroidered or when you wish to attach an appliqué to a garment.
Creating an appliqué piece
The following pattern will be used to create an
appliqué piece.
Note
●
Felt or denim fabrics are recommended to
make the appliqué piece. Depending on
the pattern and fabric used, lighter weight
fabrics may cause the stitching to appear
smaller.
●
For best results, be sure to use stabilizer
material for embroidering.
●
Select a frame that matches the pattern
size. Frame options are displayed on the
LCD screen.
●
Finish combining and editing the pattern
before selecting the appliqué setting. If the
pattern is edited after selecting the
appliqué setting, the appliqué stitching
and pattern may become misaligned.
●
Since an outline is added, the pattern for
an appliqué piece (when the appliqué
setting is selected) will be larger than the
original pattern.
First, adjust the size and position of the
pattern as shown below.
1 Embroidering area
2 Approx. 10 mm
3 Pattern size
1
Touch , and then display page 2/5
of the settings screen.
2
Use and to specify the distance
between the pattern and the appliqué
outline.
Memo
●
The setting remains selected even if the
machine is turned off.
3
Touch to return to the embroidering
settings screen.