Brother 888-L90 Operation Manual Download Page 18 | Manualshive

Page: 18 / 101

background image

Turning the Machine On/Off

Basic operations

B-7

GET

T

ING REA

D

Y

B

Turning the Machine On/Off

WARNING

• Use only regular household electricity for the power source. Using other power sources may result in fire,

electric shock, or damage to the machine.

• Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power

cord receptacle on the machine. Otherwise, a fire or electric shock may result.

• Do not insert the plug on the power cord into an electrical outlet that is in poor condition.
• Turn the main power to OFF and remove the plug in the following circumstances:

When you are away from the machine
After using the machine
When the power fails during use
When the machine does not operate correctly due to a bad connection or a disconnection
During electrical storms

CAUTION

• Use only the power cord included with this machine.
• Do not use extension cords or multi-plug adapters with any other appliances plugged into them. Fire or

electric shock may result.

• Do not touch the plug with wet hands. Electric shock may result.
• When unplugging the machine, always turn the main power to OFF first. Always grasp the plug to remove

it from the electrical outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.

• Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled.

Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the
cord, or cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized
Brother dealer for repairs before continuing use.

• Unplug the power cord if the machine is not to be used for a long period of time. Otherwise, a fire may

result.

• When leaving the machine unattended, either the main switch of the machine should be turned to OFF or

the plug must be removed from the electrical outlet.

• When servicing the machine or when removing covers, the machine must be unplugged.
• (For U.S.A. only)

This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical
shock, this plug is intended to fit in a polarized electrical outlet only one way.
If the plug does not fit fully in the electrical outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper electrical outlet. Do not modify the plug in any way.

«
...
16
17
18
19
20
...
»

Summary of Contents for 888-L90






































































































Reviews:

No comments

Related manuals for 888-L90

Brand: Janome Pages: 48

Brand: Panasonic Pages: 136

UF 890 - Panafax B/W Laser

Brand: Panasonic Pages: 174

Brand: Janome Pages: 112

Brand: Olivetti Pages: 72

Brand: Bartell Pages: 20

LAVINA ELITE 3213EHV

Brand: Superabrasive Pages: 42

Brand: Cameo Pages: 40

Brand: Kärcher Pages: 54

Brand: Singer Pages: 34

Brand: Necchi Pages: 53

Brand: Seaga Pages: 33

Streamfeeder Tagger 125 Series

Brand: Thiele Pages: 37

Brand: GBC Pages: 38

HZL - 353Z Series

Brand: JUKI Pages: 78

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 60

Brand: Panasonic Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands