Brother 888-L90 Operation Manual Download Page 4 | Manualshive

Page: 4 / 101

background image

INTRODUCTION

i

Thank you for purchasing this machine. Before using this machine, carefully read the “IMPORTANT SAFETY
INSTRUCTIONS”, and then study this manual for the correct operation of the various functions.
In addition, after you have finished reading this manual, store it where it can quickly be accessed for future reference.

Please read these safety instructions before attempting to use the machine.

DANGER

- To reduce the risk of electrical shock

1

Always unplug the machine from the electrical outlet immediately after using, when cleaning, making any user

servicing adjustments mentioned in this manual, or if you are leaving the machine unattended.

WARNING

- To reduce the risk of burns, fire, electrical shock, or injury to

persons.

2

Always unplug the machine from the electrical outlet when making any adjustments mentioned in the instruction

manual.

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug and pull

it out of the electrical outlet. Do not pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.
• Always unplug your machine if there is a power failure.

3

Electrical Hazards:

• This machine should be connected to an AC power source within the range indicated on the rating label. Do not

connect it to a DC power source or converter. If you are not sure what kind of power source you have, contact a
qualified electrician.

• This machine is approved for use in the country of purchase only.

4

Never operate this machine if it has a damaged cord or plug, if it is not working properly, has been dropped or

damaged, or water is spilled on the unit. Return the machine to the nearest authorized Brother dealer for
examination, repair, electrical or mechanical adjustment.

• While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or

deformation, stop using the machine immediately and unplug the power cord.

• When transporting the machine, be sure to carry it by its handle. Lifting the machine by any other part may

damage the machine or result in the machine falling, which could cause injuries.

• When lifting the machine, be careful not to make any sudden or careless movements, which may cause a

personal injury.

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

«
...
2
3
4
5
6
...
»

Summary of Contents for 888-L90






































































































Reviews:

No comments

Related manuals for 888-L90

Brand: UNIS Pages: 19

Brand: NanaWall Pages: 22

KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering...

Brand: Panasonic Pages: 68

Brand: Kärcher Pages: 237

Brand: Windsor Pages: 25

Brand: Bernina Pages: 134

TRIDENT T26 SC PLUS

Brand: Hillyard Pages: 28

Brand: Truvox Pages: 16

Brand: Singer Pages: 18

IP PHONEFAX 49A

Brand: Sagem Pages: 56

Brand: Advance acoustic Pages: 40

Brand: TAJIMA Pages: 118

Brand: JUKI Pages: 8

DDL-9000C Series

Brand: JUKI Pages: 198

Brand: Brother Pages: 120

Brand: Brother Pages: 81

Brand: Brother Pages: 66

Brand: Brother Pages: 156

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands