Brother 888-L90, Operation Manual

Page: 42 / 101

Preparing the Fabric
Basic operations B-31
ST
AR
T
ING T
O
EMBR
O
IDE
R
B
b
Place the fabric with the stabilizer material on top of
the outer frame.
Have the right side of the fabric facing up.
1
Right side
c
Press the inner frame in from the top of the fabric.
Line up on the inner frame and on outer frame.
d
Tighten the adjustment screw by hand just enough to
secure the fabric.
e
Gently remove the fabric from the frame without
loosening the adjustment screw.
f
Press the inner frame in from the top of the fabric
again, lining up
on the inner frame and on
outer frame.
1
Outer frame
2
Inner frame
3
Fabric (right side)
4
Stabilizer material
• Press the inner frame into the outer frame.
g
Tighten the adjustment screw while removing any slack
in the fabric by hand. The goal is to have a drum-like
sound when the fabric is struck lightly.
Memo
• This precautionary step will help reduce pattern
distortion while embroidering.
a
Memo
• You can use the included screwdriver when you
loosen or tighten the frame adjustment screw.
a
b c
d