Troubleshooting
A-18
Error messages
If the “Start/Stop” button is pressed before the machine is correctly set up or if an operation is performed incorrectly, an error
message appears in the LCD. Follow the instructions that appear. The message will disappear if
is pressed while the message
is displayed.
Error Messages
Cause/Solution
1
This message is displayed when the sewing speed controller is set to control the
zigzag stitch width, and the “Start/Stop” button is pressed. Set
(Width control)
to “OFF” (refer to page B-11), or use the foot controller to operate the machine.
2
This message is displayed when
(Twin needle) is set to “ON”, and a stitch pattern
that cannot be sewn with the twin needle is selected.
3
This message is displayed when the “Start/Stop” button was pressed while the foot
controller was connected.
4
This message is displayed when the buttonhole lever is down, a stitch other than a
buttonhole is selected, and a button, such as the “Start/Stop” button, is pressed.
5
This message is displayed when the buttonhole lever is up, a buttonhole stitch is
selected, and a button, such as the “Start/Stop” button, is pressed.
6
This message is displayed when a button, such as the “Start/Stop” button, was
pressed while the presser foot was raised.
This message is also displayed when
was pressed while the presser foot was
raised.
7
This message is displayed when
was pressed while the needle is down.
8
This message is displayed when a button, such as the Reverse/reinforcement stitch
button, was pressed while the bobbin winder shaft is moved to the right.
Summary of Contents for 888-F42
