Brother 888-F42, Operation Manual

Page: 88 / 120

Appliqué, Patchwork and Quilt Stitching
S-34
Finished project
g
After sewing is finished, slide the feed dog position
switch lever to
(to the right as seen from the rear
of the machine) and turn the handwheel to raise the
feed dogs.
Satin stitching using the sewing speed
controller
A decorative stitch can be sewn by changing the stitch width
of a satin stitch. If the machine is set so that the stitch width
can be adjusted using the sewing speed controller, the stitch
width can quickly and easily be adjusted. In this case, the
sewing speed is adjusted with the foot controller.
a
Connect the foot controller.
b
Attach zigzag foot “J”.
c
Turn on the stitch width control function.
The settings screens differ depending on the models.
■
For models with
1 Press to display the settings screen, and set
“Width Control” to “ON”.
→
The machine is now set so that the stitch width can
be controlled with the sewing speed controller.
2
Press .
■
For models with
Press .
→
The machine is now set so that the stitch width can
be controlled with the sewing speed controller.
d
Select stitch .
e
While sewing, slide the sewing speed controller to
adjust the stitch width.
Slide the controller to the left to make the width
narrower. Slide the controller to the right to make the
width wider.
• Adjust the sewing speed with the foot controller.
J
Narrower Wider