manualshive.com logo in svg

Brother 882-S85, Operation Manual

Share
Download
Brother 882-S85 Operation Manual Download Page 51

CHANGING THE NEEDLE

G

etting

 Re
ad

y

39

1

CHANGING THE NEEDLE

a

Press the “Needle Position” button to raise 
the needle.

b

Press .

*

If “OK to automatically lower the presser foot?” 
appears on the LCD screen, press OK to continue.

→

The entire screen becomes white, and all keys and 
operation buttons are locked.

c

Use the screwdriver to turn the screw 
toward the front of the machine and loosen 
the screw, then remove the needle.

 CAUTION

• Always press 

 on the screen before changing the needle. If 

 is not pressed and the Start/

Stop button or another operation button is pressed accidentally, the machine will start and injury may 
result.

• Use only sewing machine needles made for home use. Other needles may bend or break and may cause 

injury.

• Never sew with a bent needle. A bent needle will easily break and may cause injury. 

Memo

To check the needle correctly, place the flat 
side of the needle on a flat surface. Check the 
needle from the top and the sides. Throw 
away any bent needles.

a

Parallel space

b

Level surface (bobbin cover, glass, etc.)

Note

Before replacing the needle, cover the hole in 
the needle plate with fabric or paper to prevent 
the needle from falling into the machine.

b

a

Note

• Do not apply pressure to the needle clamp 

screw. Doing so may damage the needle or 
machine.

Summary of Contents for 882-S85





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands