manualshive.com logo in svg

Brother 882-S85, Operation Manual

Share
Download
Brother 882-S85 Operation Manual Download Page 258

ERROR MESSAGES

246

This message is displayed when, 
after selecting a pattern, 

, , , 

or 

 is pressed and the 

pattern is about to be deleted. 

This message is displayed when 
the foot controller is pressed 
while the embroidery unit is 
attached and machine is set up 
for embroidering.

This message is displayed when 
the speed control lever is set to 
control the zigzag stitch width, 
and the “Start/ Stop” button is 
pushed. Use the foot controller 
to operate the machine. 

This message is displayed when 
there is a possibility that the data 
for the selected pattern is 
corrupted.

This message is displayed when 
the machine is in embroidery edit 
mode, and you try to use an 
editing function when the pattern 
is not completely within the red 
outline. 

This message is displayed when 

 is pressed when 

changing thread colors.

This message is displayed when 
you try to save a copyright 
protected pattern to USB media/
Computer. According to 
copyright laws, patterns that are 
illegal to reproduce or edit 
cannot be saved to USB media 
or computer. If this message 
displays, save the pattern in the 
machine’s memory. 

This message is displayed when 
the feed dogs are raised while 
the Embroidery or Embroidery 
Edit screen is displayed.

This message is displayed when 
the machine is in twin needle 
mode and a pattern that cannot 
be sewn with the twin needle is 
selected.

This message is displayed when 

either 

 or 

 is 

pressed when the feed dogs are 
lowered.

Summary of Contents for 882-S85





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands