Brother 882-S85 Operation Manual Download | Manualshive

Page: 22 / 276

background image

TURNING THE MACHINE ON/OFF

10

TURNING THE MACHINE ON/OFF

a

Insert the power cord into the power cord
receptacle, then insert the plug into a wall
outlet.

a

Main power switch

b

Power cord

b

Turn the main power switch to “I” to turn
on the machine.

a

OFF

b

ON

c

Turn the main power switch to “O” to turn
off the machine.

WARNING

• Use only regular household electricity as the power source. Using other power sources may result in fire,

electric shock, or damage to the machine.

• Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power

cord receptacle on the machine.

• Do not insert the plug on the power cord into an electrical outlet that is in poor condition.
• Turn the main power to OFF and remove the plug in the following circumstances:

When you are away from the machine
After using the machine
When the power fails during use
When the machine does not operate correctly due to a bad connection or a disconnection
During electrical storms

CAUTION

• Use only the power cord included with this machine.
• Do not use extension cords or multi-plug adapters with many other appliances plugged in to them. Fire or

electric shock may result.

• Do not touch the plug with wet hands. Electric shock may result.
• When unplugging the machine, always turn the main power to OFF first. Always grasp the plug to remove

it from the outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.

• Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled.

Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage the
cord, or cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorized
dealer for repairs before continuing use.

• Unplug the power cord if the machine is not to be used for a long period of time. Otherwise, a fire may

result.

• When leaving the machine unattended, either the main switch of the machine should be turned to OFF or

the plug must be removed from the socket-outlet.

• When servicing the machine or when removing covers, either the machine or the electrical set must be

unplugged.

• For U.S.A. only

This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical
shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way.

a

b

a

b

«
...
20
21
22
23
24
...
»

Summary of Contents for 882-S85





















































































































































































































































































Reviews:

No comments

Related manuals for 882-S85

Brand: Janome Pages: 84

Brand: Janome Pages: 43

Brand: Vendors Exchange Pages: 13

Brand: Baby Lock Pages: 198

Brand: White Pages: 34

Brand: Singer Pages: 10

Brand: Singer Pages: 24

Autopax PAX200H

Brand: Quasar Pages: 76

KM 150/500 R D 4W

Brand: Kärcher Pages: 420

Brand: Olivetti Pages: 269

Brand: Opus Pages: 16

Brand: Emerson Pages: 13

Brand: Singer Pages: 48

Brand: AEG Pages: 20

Brand: AEG Pages: 20

Brand: AEG Pages: 53

Brand: AEG Pages: 52

Brand: AEG Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands