Section 1 Introduction
12
EtherNet/IP Communication
Figure 1-7 EtherNet/IP M12, 4 Pole
Female D connector for In-Out ports
Figure 1-8: EtherNet/IP 5 Pin M8 Male Nano-
change Connector for Power
Figure 1-9 EtherNET IP layout under
the Top Cover
EtherNet/IP
™
Communications
The SLAMF IP-66 Series is now available with the state-of-the-art
EtherNet/IP™ communications interface. Please refer to the
supplemental EtherNet/IP manual for more description of the benefits of
Brooks’ implementation of the communications platform.
The available physical interfaces on the EtherNet/IP™ device
are
listed
below:
- 5
pin
M8
Male
Nano
Change
Connector
-
In and Out ports with M12 connectors labeled “1” and “2”.
-
2.5 mm female jack for RS485 diagnostic port, which is
located
under
the
top
cover
Web-based
Network
Settings
Interface:
-
Network configuration is DHCP.
- Network
address
is
192.168.1.100
12
