1-3
1.5 Installation Procedures
To install the QmBS flowsensor, the following procedures are required:
•
Install the sensor (all models) – see Section 2
•
Install the transmitter
-
QTA field-mount transmitters – see Section 3
-
QTA DIN rail mount transmitters – see Section 4
•
Wire the transmitter to the sensor – see Section 5
•
Wire the transmitter outputs or connect the communication wires:
-
QTA FM AN transmitters – see Section 6
-
QTA FM CIO transmitters – see Section 7
-
QTA FM FB or PA transmitters – see Section 8
-
QTA DIN AN transmitters – see Section 9
-
QTA DIN CIO transmitters – see Section 10
1.6 QmBS Model Numbers
The QmBS sensor model number has the following form:
QmBSMxxxxxxxxxxx
The first five characters identify the sensor model.
The QTA transmitter model number has the following form:
QTAxxxxxxxx
where the fourth character identifies the transmitter type:
•
1
and
3
= FM AN
•
2
= DIN AN
•
4
= FM CIO
•
5
= DIN CIO
•
6
= FM FB
•
7
= FM PA
1.7 Additional Documentation
For information on transmitter configuration and use, and flowsensor troubleshooting, (see
QTA
Transmitters
:
Configuration and Use, QTA Transmitters with FOUNDATION Fieldbus: Configuration
and Use,
or
QmBS Transmitters with Profibus-PA: Configuration and Use.)
Instruction and Operation Manual
X-CM-QmBS-eng
Part Number: 541B052AHG
June, 2008
Section 1 Before You Begin
QmBS Sensor / QTA Transmitters