7-8
Figure 7-11 Discrete Output 2 – Terminals 5 & 6 (Channel C) – Internal Power
Figure 7-12 Discrete Output 2 – Terminals 5 & 6 (Channel C) – External Power
Note: See Figure 7-14 for output voltage versus load.
Total load
+
–
Note: See Figure 7-15 for recommended
resistor versus supply voltage
Excessive current will damage the transmitter.
Do not exceed 30 VDC input. Terminal current must be
less than 500 mA.
3–30 VDC
+
–
+
–
Pull-up resistor or DC relay
CAUTION
Instruction and Operation Manual
X-CM-QmBS-eng
Part Number: 541B052AHG
June, 2008
Section 7 I/O Wiring FM CIO Transmitter
QmBS Sensor / QTA Transmitters
