10-5
Instruction and Operation Manual
X-CM-QmBS-eng
Part Number: 541B052AHG
June, 2008
Section 10 I/O Wiring DIN CIO Transmitter
QmBS Sensor / QTA Transmitters
Figure 10-5 Frequency Output Wiring – Terminals 23 & 24 (Channel B) – Internal Power
Figure 10-6 Frequency Output Wiring – Terminals 23 & 24 (Channel B) – External Power
Counter
000042
Note: See Figure 10-13 for output voltage
versus load resistance.
+
–
Output voltage level is +15 VDC ±3%
with high resistance load.
–
+
Note: See Figure 10-15 for recommended resistor
versus supply voltage.
000042
Counter
Pull-up resistor
3–30 VDC
+
–
Excessive current will damage the transmitter.
Do not exceed 30 VDC input. Terminal current must be
less than 500 mA.
CAUTION
