AMETEK Brookfield Page 8
Manual No. M09-1200-F1016
Temperature:
Requires optional temperature probe (Part No. DVP-94Y).
-20°C to 120°C. Ac/- 1.0°C.
Humidity Sensing:
Requires optional humidity sensor (Part No. PFT-607Y).
10% to 95% RH Ac/-3% (35-75% RH),
+/-5% (<35% RH, >75% RH)
Output:
USB Port or RS-232 compatible Serial Port
Particle Size:
The maximum particle size for the Standard Volume Shear Cell
is 1 mm, assuming a relatively monosized material. A small size
fraction at 2 mm with 90% below 1 mm is acceptable.
For the Small Volume Shear Cell, the maximum particle size is
250 micron, assuming a monosized material. A small size fraction
at 500 micron with 90% below 250 micron is acceptable.
Environmental Conditions: 0°C to 40°C temperature range (32°F to 104°F)
20%-80% relative humidity, non condensing atmosphere
Use:
Intended for indoor use only. Altitude up to 2000 meters
Dimensions:
36.2 cm (14 1/4”) W x 39.7 cm (15 5/8”) D x 67.6 cm (26 5/8”) H
(See Figure I-1)
Weight:
34 kg (75 lb)
Minimum System Requirements for the Powder Flow Pro software:
Microprocessor:
2GHz processor
Memory:
512 MB of RAM
Hard Drive Space:
30 MB available
Video
: 1024 x 768 resolution, 128 MB of graphics memory
Operating System:
Windows XP or above
Communications Port:
One USB or RS-232 port
