AMETEK Brookfield Page 66
Manual No. M09-1200-F1016
Appendix D: PFT Packing to Ship for Repair and Service
Note: All items must be packed as shown. If your packaging is missing, please
contact Brookfield Engineering for replacement parts. Failure to do so
could result in costly damage to the PFT.
If you saved the original packing instructions which came with the PFT, use them in
accordance with the following instructions on page 63.
If you have ordered new packaging materials from Brookfield or an authorized dealer
(Part Number: PFT-REPACK), the following items have been provided in the Repack Kit:
PFT RSC 500DW (accessory box) (qty 1):
PFT-PACK1
PFT HSC 500DW (large outer box) (qty 1):
PFT-PACK2
PFT Tray Stitched (qty 1):
PFT-PACK3
1.7# PE Foam D/C’s (bottom) (qty 1):
PFT-PACK4
1.7# PE Foam D/C’s (top) (qty 1):
PFT-PACK5
PFT Shipping Pallet (qty 1):
PFT-PALLET
Poly Bag for PFT Shipping Pack (qty 1):
PFT-BAG
Shipping Foam, Compression Plate (qty 1):
PFT-104
Shipping Foam (6-inch Trough) (qty 1):
PFT-101
Shipping Foam (5-inch Trough) (qty 1):
PFT-106
3x3x3 .225 Strapping Protectors (qty 8):
CTN-14
Label, Box, Packaging & Shipping Info (qty 2):
LBL11-PFT3
Set of 2, 1in. x 12ft. Lashing Straps (qty 2):
PFT-116
PFT Packing Instructions for Shipping (qty 1):
T11-1041
Velcro Strapping, 5/8 wide (qty 1):
PFT-115
Bubble bags, rubber bands and packing newspaper will also be supplied in the Repack Kit.
Detailed instructions for packaging the PFT proceed on the following page. It is important
to follow these instructions completely in order to prevent damage to the PFT during
shipment.
