Brookfield Engineering Labs., Inc.
Page 119
Manual No. M13-167-A0415
Appendix K - Screen Protector
The Brookfield DV3T Rheometer is provided with a screen protector that can be applied to the
touch screen surface. This screen protector is designed for prolonged use. Brookfield recommends
replacing the screen protector within 1 year of application. The screen protector is provided in a
kit (part number GV-1019) that includes the following items:
• Two screen protectors (with mounted applicator and tabs)
• One screen cloth (part number GV-1045)
• One soft card
• Instructions printed on the package
Retain the soft card and screen cloth with any unused screen protector.
Install the Screen Protector
Installation instructions for the screen protector are available in three methods:
1. Read printed instructions on the package
2. View the instructional video on the Brookfield YouTube Channel:
www.youtube.com/user/BrookfieldEng
3. Read the expanded printed instructions in this appendix (see below).
A failure to properly install the screen protector may result in a disabled
touch screen.
Step 1:
• Turn off the DV3T rheometer (power down) prior to installation.
• Clean the DV3T touch screen with the screen cloth prior to
installation. Any debris, dust, or oil on the touch screen may
prevent proper adhesion of the screen protector.
• Identify Tab 1 and Tab 2 prior to removing any protective layer.
Peel back adhesive Tab 1, from the bottom, to expose half of the
protector (see Figure K-1).
• Do not touch the exposed surface of the adhesive side of the screen
protector.
Step 2:
• Alignment of the screen protector to the bezel (frame) of the DV3T
is critical. Be sure to avoid mis-alignment which may result in the
screen protector contacting or locating under the bezel (frame).
A foam alignment tool is attached to the screen protector’s outer
layer and should be used to locate the screen protector to the lower
right hand corner of the touch screen (see Figure K-2).
Failure to properly align (install) the screen protector could result in a
failure of the touch screen.
Figure K-1
Figure K-2
Summary of Contents for DV3T
Page 2: ......
