Brookfield Engineering Labs., Inc.
Page 19
Manual No. M13-167-A0415
All elements related to the measurement of yield are selected within Configure Yield Test . Tests that
are created can be saved to the internal memory of the DV3T Rheometer or onto a connected USB
Flash Drive. Tests can be loaded from memory by selecting Load Test from the Home Screen
.
TIP: Many aspects of configure Yield Test can be limited when User ID and Log In functions are
implemented (see Section V.4.2).
The basic Configure Yield Test view is shown in Figure II-6. This view includes the Status Bar
(Section II.3), Title Bar (which includes the Home and Settings icons), test name, test parameters,
the More/Less bar, and Command Keys (see Section II.4).
More/Less Bar
Command Keys
Status Bar
Title Bar
Test Parameters
Test Name
Figure II-6
The user can see the name of any test that has been loaded thorough the Load Test function. In
Figure II-6, the file name is listed as Unsaved Test, indicating that the current test has not been saved.
The More/Less bar is seen just below the test parameters. In Figure II-6, the bar includes a
down arrow, which indicates that more information is available. Figure II-7 shows the additional
information that can be accessed. The More/Less bar in this view now has an up arrow indicating
that the additional information can be hidden.
More/Less Bar
Command Keys
Status Bar
Title Bar
Data Fields
Test Name
Figure II-7
Summary of Contents for DV3T
Page 2: ......
