Brookfield Engineering Labs., Inc.
Page 74
Manual No. M13-167-A0415
V.4.6 Settings Reset
Settings Reset will return the DV3T settings (Device, User and Global) to the factory default.
Internal memory will not be affected. User accounts will not be affected.
V.4.7 Device Reset
DATA LOSS POSSIBLE!
Device Reset will return the DV3T to the factory default condition. All data, tests and Audit Trails
will be deleted from internal memory. All User accounts will be deleted.
TIP: Move data files and test files to a USB Flash Drive prior to selecting Device Reset.
V.4.8 Calibration Reminder
The DV3T can be programmed to provide the user with a reminder that calibration is due. Two
parameters must be set: Frequency in Months and Start Date. When both parameters are entered,
the Calibration Reminder screen (see Figure V-13) will calculate and display the day when the
reminder will be presented.
Check the Calibration Reminder On check box to activate this feature.
Figure V-13
The Calibration Reminder will be presented during the first power up on or after the specified day.
The message box (see Figure V-14) requires that the user press OK before the AutoZero will be
performed.
Summary of Contents for DV3T
Page 2: ......
