22
Brocade Network Advisor SMI Agent Developer’s Guide
53-1002701-01
Fabric profile
3
•
The SAN element name is reset to the default value when the principal switch WWN is changed
during fabric merge or segmentation.
-
For example, assume there are two switch fabrics where switch1 is the seed switch and
switch2 is the principal switch, and SAN Element name is configured. If a switch3 joins the
fabric as a principal switch, then the element name changes to switch3 WWN and the
configured name is lost.
Zone control and enhanced zone control subprofiles
The zone control subprofiles enable discovery of a fabric's zone database and provisioning of
zoning operations.
Registration
Refer to
“Registration”
on page 18.
Data model
Figure 10
shows the data model with the classes and properties that are supported to conform to
these subprofiles. Only those properties that are mandatory are considered.
Summary of Contents for Network Advisor SMI Agent 12.0.0
Page 4: ...iv Brocade Network Advisor SMI Agent Developer s Guide 53 1002701 01...
Page 8: ...viii Brocade Network Advisor SMI Agent Developer s Guide 53 1002701 01...
Page 118: ...104 Brocade Network Advisor SMI Agent Developer s Guide 53 1002701 01 Names 3...
Page 162: ...148 Brocade Network Advisor SMI Agent Developer s Guide 53 1002701 01 Life cycle indications 4...