Brocade Communications Systems Network Advisor SMI Agent 12.0.0, Developer'S Manual

Page: 123 / 172

Brocade Network Advisor SMI Agent Developer’s Guide 109
53-1002701-01
Alert indications
4
FC8 Fabric added or removed. Also, applicable
in Virtual Fabrics.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=SNIA and MessageID=FC8 AlertingManagedElement COP of Brocade_Fabric
AlertingElementFormat COP
AlertType Device Alert
OtherAlertType N/A
AlertSubType Fabric added or Fabric
removed
PerceivedSeverity 5 (Major)
ProbableCause 123
SystemCreationClassName Brocade_Fabric
SystemName Fabric WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity SNIA
Message Fabric <Fabric Identifier>
was <Change Type>FC
Port <Port Identifier> in
<Device Type>
MessageArguments Fabric WWN, Added or
Removed
FC10 Deactivate the active zone configuration
through Brocade Network Advisor or CLI
or Brocade Network Advisor SMI Agent.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=SNIA and
MessageID=FC10 AlertingManagedElement COP of Brocade_Fabric
AlertingElementFormat COP
AlertType Environmental
OtherAlertType N/A
AlertSubType Config Disabled
PerceivedSeverity Informational
ProbableCause 123
SystemCreationClassName Brocade_Fabric
SystemName Fabric WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity SNIA
Message Zoning was deactivated
for fabric <WWN>
MessageArguments WWN = string Fabric
Principal WWN
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value