Brocade Communications Systems Network Advisor SMI Agent 12.0.0, Developer'S Manual

Page: 158 / 172

144 Brocade Network Advisor SMI Agent Developer’s Guide
53-1002701-01
Alert indications
4
NOTE
For indications from BRCD61 to BRCD76:
All CEE alert indications and life-cycle indications are only applicable for FOS switches (Brocade
8000 switch and FCOE10-24 blade) with versions from v6.4.0. To get all CEE indications, make sure
that CEE indication is enabled in the switch.
BRCD101 Fabric principal switch WWN changed.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD101 AlertingManagedElement COP of Brocade_Fabric
AlertingElementFormat COP
AlertType Device Alert
OtherAlertType N/A
AlertSubType Principal switch WWN
changed
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Fabric
SystemName Fabric WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Principal switch <WWN>
changed to <WWN>
MessageArguments old principal switch WWN
new principal switch
WWN
BRCD102 SAN zone activation error. This alert
indication is delivered for each fabric
failure.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity= BROCADE and
MessageID=BRCD102
NOTE: This indication is delivered only if
the operation is done through
Brocade Network Advisor SMI
Agent.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other
OtherAlertType Zone alert
AlertSubType SANZone activation
failed
PerceivedSeverity 5 (Major)
ProbableCause 123
SystemCreationClassName Brocade_Fabric
SystemName Fabric WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity Brocade
Message SANZone activation
failed for fabric <WWN>
MessageArguments Fabric WWN
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value