Brocade Communications Systems ICX 7250 series, Configuration Manual

Page: 465 / 483

Displaying VRRPv3 statistics
Various show commands can display statistical information about IPv6 VRRP configurations.
Before displaying statistics, VRRPv3 must be configured and enabled in your network to generate traffic.
Use one or more of the following commands to display VRRPv3 information. The commands do not have to be entered in this order.
1. Use the exit command to return to privileged EXEC mode, if required.
2. Enter the show ipv6 vrrp command to display IPv6 VRRPv3 configuration information.
device(config)# show ipv6 vrrp
Total number of VRRP routers defined: 1
Interface 1/1/3
----------------
auth-type no authentication
VRID 13 (index 2)
interface 1/1/3
state master
administrative-status enabled
version v3
mode non-owner(backup)
virtual mac 0000.5e00.0217
priority 100
current priority 100
track-priority 1
hello-interval 1000 ms
backup hello-interval 60000 ms
advertise backup disabled
dead-interval 3000 ms
preempt-mode true
ipv6-address fd2b::1
next hello sent in 700 ms
short-path-forwarding disabled
Displaying VRRPv3 statistics
Brocade FastIron Layer 3 Routing Configuration Guide
53-1003903-04 465